26
|
PROVENO E
Rev. 1.2 (24.08.2016)
Operation instructions
4.2.5. Changing the temperature
Press the temperature button.
Select the temperature desired.
4.2.6. Stopping the cooking
Press the temperature button for a long time (approx. 2 seconds).
The heating goes off when ’On’ appears on the display.
4.2.7. Mixing functions
Starting the mixer (manual mixing)
Switch on the appliance. The temperature display indicates ’On’.
Select the mixing function. Message ’15’ appears on the mixer display.
Start the mixer.
You can adjust the mixing speed with the central dial while the mixer display is blinking.
Changing the speed
When the mixer is running, press the start/pause button once.
Select the speed (15-140 rev./min.) with the central dial.
NOTE: You cannot change the mixing speed, if a mixing program (P1-P6 or CLN) is in operation. However,
it is also possible to start power mixing when a mixing programs is running (see ”Power mixing during
mixing”).
Auto-reverse function
When the mixer is running, press the mixer button once. A rotating symbol appears on the
left-hand side of the display and the mixer is auto-reversing.
Power mixing during mixing
When the mixer is running, press and keep pressed the mixer button. A rotating symbol
appears on the whole display.
Power mixing is heavy auto-reverse mixing, which continues as long as the button is held down. Power
mixing can be used whenever the mixer is running, also during the pre-set mixing programs.
Make sure before using power mixing that possible splashes of food do not cause any danger to safety
at work.
To Next Page
Loading...
