EasyManua.ls Logo

Metos PROVENO E - Program Cancellation and Interruption; Power Failure Handling

Metos PROVENO E
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
|
PROVENO E
Rev. 1.2 (24.08.2016)
Operation instructions
Cancelling a program
In order to cancel a program before it has been started:
Press once
Select the value Strt
Push the central dial
Press and keep pressed for about 2 seconds.
The indicator light of the PROG button goes off and ‘On’ is displayed.
Interrupt a running program
In order to interrupt a program that is running:
Press and keep pressed for about 2 seconds.
The indicator light of the PROG button goes off and the timer functions are cancelled. The heating and
mixer functions continue. If desired, the mixer can be stopped with the STOP button. You can cut off the
heating by pressing the temperature button for about 2 seconds, until the temperature display shows
‘On.
4.2.15. Possible power failure during timing or EasyRun program
A message appears on the timer display indicating power failure during timing or during the starting or
operation time of the EasyRun program.
Power failure during the starting time
In case of power failure during the starting time, the kettle’s timer display shows, when the power supply
is restored, how much the start was delayed:
during operation time, letter E + delayed time in hours and minutes and the remaining operation time
alternate on the display, e.g. E1.10 / r0.58
after operation time, the display shows letter E + delayed time in hours and minutes, e.g. E1.10
Power failure during the operation time
In case of power failure during the operation time, the kettles timer display shows, when the power
supply is restored, for how long a time the operation was interrupted:
during operation time, letter E + interrupted time in hours and minutes and the remaining operation
time alternate on the display, e.g. E0.12 / r0.46, and the green indicator light on the operation time
button is blinking
after operation time, the display shows letter E + interrupted time in hours and minutes, e.g. E1.12,
and the green indicator light on the operation time button is blinking
in case of several power failures, their durations are summed up

Table of Contents

Related product manuals