Metos PROVENO E - Self-control (HACCP)

40
|
PROVENO E
Rev. 1.2 (24.08.2016)
Operation instructions
4.2.18. Self-control (HACCP) (option)
The self-control function is a separate option. The TempNet is an option based on wireless temperature
transmitting to a central server application. If a message ’InF1’ appears on the display, the self-control
function cannot be switched on or it has been intentionally switched off by the user. If your Proveno kettle
is fi tted with the self-control program, which you want to take into use, you have to change parameters
according to ”Adjustment instructions, Setting customer specifi c parameters” later in this manual. The
parameter for self-control is No. 51.
Activating the collection of self-control data (HACCP)
Press the HACCP button. ’HACC On’ blinks on the display and the HACCP button indicator
light illuminates.
The text blinks three times, after which a dot at the lower right-hand edge of the temperature display
keeps on blinking to indicate data collection.
Stopping the collection of self-control data
Press and keep pressed for about 5 seconds.
’HACC OFF’ blinks three times on the display. The collection of temperature data is interrupted and the
blinking dot on the temperature display goes off.
4.2.17. CleanPlus cleaning aid program - ClnP
The CleanPlus – ClnP – program is a preset program that can be used to intensify soaking preferably used
together with a cleaning tool.
ClnP Cleaning program
• fi lls the kettle size dependent amount of water into the kettle
• heats the water to 55°C
• mixer running in autoreverse mode
• duration 5 minutes
To activate the cleaning program:
Press once
Select the value ClnP
Push the central dial
Press once
Select the value Strt
Push the central dial
Press once