|
67
PROVENO E
Rev. 1.2 (24.08.2016)
Troubleshooting
MALFUNCTION POSSIBLE CAUSE WHAT TO DO
The automatic
cooling program is
interrupted although
the set temperature
is not reached
The temperature of the cooling wa-
ter is so high that it is not possible
to reach the set temperature, the
reached temperature is fl ashing on
the temperature display
Select a fi nal temperature that is possible
to reach with the temperature of the cool-
ing water at hand. If there is a need for
lower temperatures, please contact your
dealer for information on ice bank cooling
systems.
When you contact service personnel, give the following information for the unit in question:
• what is the type and model of the unit
• what is the serial number of the unit and the date the unit has been installed
• a short description of the fault, what function is not working, what signals are the displays showing
• what happened/was done immediately before the fault occurred
To Next Page
Loading...
