|
3
VIKING 4G E, S
Rev. 1.0 (29.1.2020)
6.4.2. Subsurface frame cast into the fl oor .........................................................................................................32
6.4.3. Surface installation frame fi xed to the fl oor...............................................................................................33
6.5. Installation on frames ................................................................................................................................34
6.6. Free standing kettles .................................................................................................................................36
6.7. Electrical connections ................................................................................................................................40
6.7.1. Electrical Connection to Peak Power Regulating Systems ........................................................................42
6.8. Water and steam connections...................................................................................................................44
6.8.1. Water connection and quality requirements .............................................................................................45
6.8.2. Extreme water conditions .........................................................................................................................46
6.8.3. Steam and condensate connections .........................................................................................................46
6.9. Ventilation ..................................................................................................................................................48
6.10. Other installations .....................................................................................................................................48
6.11. Procedures after installation ......................................................................................................................48
6.11.1. Adjusting the tilting ...................................................................................................................................48
6.11.2. Fastening the mixer motor cover box ........................................................................................................49
6.12. First run and testing ..................................................................................................................................49
6.12.1. Filling the steam generator (electrically heated models without cooling or autom. jacket fi lling) .............49
6.12.2. Cooking mode (steam heated models) .....................................................................................................50
6.12.4. Safety valve test ........................................................................................................................................51
6.12.3. Earth leakage circuit breaker test (option) .................................................................................................51
6.13. Staff training ..............................................................................................................................................51
7. Technical specifi cations ..........................................................................................................................52
7.1. Dimensions ...............................................................................................................................................52
7.2. Floor drain and installation frame positioning ............................................................................................53
7.3. Steam connection .....................................................................................................................................54
7.4. Water connection ......................................................................................................................................54
7.5. Electrical connections ................................................................................................................................55
7.6. Installation/commissioning checklist .........................................................................................................57