NOTE
If procedure is rejected for any reason (RFID media not
on the White List, etc.) the Display shows “no”
accompanied by long acoustic signal. Locker
automatically opens.
MULTI LOCKING:
If procedure is rejected and “FULL” is displayed
accompanied by interrupted acoustic signal, you have
reached locker limit for your RFID media. Locker
automatically opens.
NOTE
If the locker was closed and RFID media not presented, locker automatically opens when time
countdown ends.
Normal locking procedure with PIN code
STEP 1: Close the locker door. Time countdown starts
(vertical lines are displayed) on the Display and
interrupted beep acoustic signal is activated.
STEP 2: Choose and enter up to 4 digit PIN code.
Confirm your PIN code with the key.
NOTE: Sign “o” is displayed for each PIN digit entered.
From 1 to 4 digits are accepted as a PIN code.
NOTE: The key cancels the procedure.
To Next Page
Loading...
