If “bLOC” is displayed when unlocking, tenancy time is
expired.
Go to the cashier’s/information desk.
Use as an information terminal
If the RFID media is presented and recognized as a locker
key on different device the locker number is flashing on
the display and interrupted acoustic signal is activated.
Locker remains closed.
This feature can be viewed as information for user which
locker was locked by her/his RFID media and where to go
to open it.
If the RFID media is presented and recognized as a
special Payment key, one coin is added.
NOTE
Coins added with the special Payment key are not counted in sum of all inserted coins. See paragraph
“Basic Setup mode of operation” action “Display Saldo” for more details.
To Next Page
Loading...
