Metra Electronics ELS - Unlock with Fingerprint

Page 18
Metra ELS User Manual
STEP 2: Sign “Pin” is flashing and beep acoustic signal is
heard. Enter the PIN code that was used to lock
corresponding locker and confirm it with  key.
NOTE: The  key cancels the procedure.
STEP 3: If correct PIN code is entered, locker number is
displayed and corresponding locker is unlocked and
opened. Short acoustic signal is also activated.
 NOTE 
 If sign “Euro” / “Coin” / ”GbP” / ”PAY” / “USd /
“CHF” is displayed instead of locker number, continue
with the procedure described in paragraph
“Exceeded tenancy time”
 If sign “bLOC” is displayed instead of locker number,
see paragraph “Expired tenancy time”!
 Locker locked with fingerprint
STEP 1 (optional): Enter the number of the locker you
want to open and confirm it with  key.
NOTE: The  key deletes last entry.
 NOTE 
Not available with Display RFID. Feature is useful if you
lock multiple lockers on the same device by presenting
the same finger and you want to open just one particular
locker. After the locker number is entered and
confirmed, Display shows “FP”.
STEP 2: Insert your finger in the Fingerprint module.
 NOTE 
If you have multiple lockers lock on the same device with
the same finger and you skipped step 1, one of the
(remaining) locked lockers will open randomly.