Need help?Do you have a question about the METREL EasiPLUS MI 3000 and is the answer not in the manual?
General| Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
|---|---|
| Type | Multifunction Tester |
| Measurement Category | CAT III 600 V |
| Display | LCD |
| Power Supply | 6 x 1.5 V AA batteries |
| Storage Temperature | -20°C to +60°C |
| Safety | EN 61557 |
General warnings and important notes for safe operation of the instrument.
Explains display sections, symbols, warnings, messages, and results for clear interpretation.
Procedure and safety for performing insulation resistance measurements.
Covers R LowΩ and low current continuity tests for conductor integrity.
Details contact voltage, trip-out time, trip-out current, and autotest for RCD verification.
Explains fault loop impedance and prospective fault current measurements.
Procedure for measuring line impedance and prospective short-circuit current.
To Next Page