Metrix MTX 3292 - Page 53

Technical characteristics
100,000 cts digital multimeters 53
Technical characteristics of the MTX 3292, MTX 3293 (continued)
Secondary
frequency
measurement
Range
Resolution
Protection
Acceptable overload
10 to 100 Hz
0,001 Hz
0,02 % + 8 D
1450 Vcc
(1 min max.)
sur gamme 100 mV
100 to 1000 Hz
0,01 Hz
1000 to 10 kHz
0,1 Hz
10 to 100 kHz
1 Hz
100 to 200 kHz
10 Hz
Range
Sensitivity (applicable only to rectangular signals) Vrms
100mV
1V
10V
100V
1,000V
10 Hz to 200 kHz
15 % of the range
10 % of the
range
10 % of the range
5 to 10 %
10 Hz to 10 kHz
10 kHz to 30 kHz
() Freq limited to [kHz]: 15,000/U input [V]
U input [V] limited to [V]: 15,000/Freq [kHz]
() at 50kHz for the «Ampere» range
The measurement is made by capacitive coupling.
Input resistance:  10M (F <100Hz)
Protection by varistors on the voltage input.
www.ShopAEMC.ca
Shop for AEMC products online at:
1.800.561.8187