2.1 Setting up and connecting the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4
￭￭￭￭￭￭￭￭
916 Ti-Touch
Plugging in the mains cable
Warning
An incorrect mains voltage can damage the device.
Operate the device only with the mains voltage specified for it. Use the
supplied power supply unit exclusively.
Note
The plug of the power supply unit is protected against accidental dis-
connection of the cable by means of a pull-out protection feature. If
you wish to pull out the plug, you will first need to pull back the outer
plug sleeve marked with arrows.
Connecting a propeller stirrer 802 Stirrer
To Next Page
Loading...
Need help?
General
