6.3 Carrying out the determination
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
40
￭￭￭￭￭￭￭￭
916 Ti-Touch
1
Display the titration curve
￭ Tap on [Curve].
You can change the presentation of the curve under [Curve
options].
￭ Return to the result page with [
].
6.3.4 Recalculating the determination
The titration may be recalculated if needed after it has been completed.
The sample size, the calculation formula or the evaluation parameters, for
example, can be modified at the time of recalculation. It is also true, how-
ever, that variables such as the end volume, the total duration of the titra-
tion or the initial measured value can be output afterwards.
The duration of the titration should be calculated as an example.
Adding and recalculating a calculation
Proceed as follows:
1
Open the CALC command
￭ Return to the main dialog with [
].
￭ Open the method with [Edit parameters].
￭ Select the CALC command and tap on [Edit command].
2
Add a new calculation
￭ Tap on [New].
To Next Page
Loading...
Need help?
General
