3.2 Selecting the dialog language
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
916 Ti-Touch
Switching off the instrument
Caution
The 916 Ti-Touch must be switched off by pressing the mains switch on
the rear of the instrument before the electricity supply is interrupted. If
this is not done, then there is a danger of data loss.
Proceed as follows:
1
￭ Press the mains switch on the left-hand side of the rear panel of
the 916 Ti-Touch.
The current data is saved and the system is shut down. This process
takes just a short time. At the same time, all other devices connected
to the 916 Ti-Touch via a USB cable are also being switched off.
3.2 Selecting the dialog language
The user interface is available in several languages. In addition to the two
default dialog languages English and German, additional languages can
be selected.
Proceed as follows to select the dialog language:
1
Open the system settings
￭ In the main dialog, tap on [System].
￭ Tap on [System settings].
The dialog System / System settings is displayed.
To Next Page
Loading...
Need help?
General
