￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Carrying out simple titrations
916 Ti-Touch
￭￭￭￭￭￭￭￭
37
6.3 Carrying out the determination
6.3.1 Preparing the titration
The Prepare function is used to rinse the cylinder and tubings of the
buret unit and fill them bubble-free. You should carry out this function
before the first determination or once per day.
Preparing the buret unit
Proceed as follows:
1
Open the manual control
￭ Tap on the fixed key [
] (= Manual control).
￭ Select Dosing.
2
Carry out the dosing function Prepare
Note
Make sure that the buret tip is directed into a vessel that can
accommodate the cylinder volume of your buret unit several times
over.
To Next Page
Loading...
Need help?
General
