6.1 Creating a titration method
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26
￭￭￭￭￭￭￭￭
916 Ti-Touch
6 Carrying out simple titrations
6.1 Creating a titration method
Now create a method for a simple titration. A method contains a
sequence of commands which are executed one after the other.
The acid or base content of a sample should be determined by means of a
triple determination. If you have a printer connected, then a report with
the result and the curve should be printed out automatically at the end of
the determination.
Proceed as follows:
Creating a new method
1
Load the method template
￭ In the main dialog, tap on [Load method] and then on [New
method].
￭ Select the template Dynamic Titration pH and tap on [Load
template].
Use [Yes] to confirm any message which may appear concerning
the modification of an existing method.
To Next Page
Loading...
Need help?
General
