￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Setting up the user administration
916 Ti-Touch
￭￭￭￭￭￭￭￭
57
2
Activate login with ID profile
￭ Activate Login via identification profile.
￭ Deactivate all other settings.
￭ Return to the user administration with [
].
You can confirm the request following the creation of ID profiles
with [Yes] if you have created an ID profile beforehand. Make sure
that the USB flash drive is plugged in.
Note
If you have not yet created any ID profiles, then you must confirm
the request with [No]. Then you can deactivate the Login via
identification profile and create an ID profile in the user admin-
istration.
Confirm any messages which may appear with [Yes].
An automatic login will now take place.
3
Log in
￭ Tap on [OK] after the request that you plug in the USB flash drive
with your ID profile.
￭ In order to log in another user with ID profile, tap in the main dia-
log on [Control/ Logout] and afterwards on [Logout].
The request appears once again to insert a USB flash drive.
To Next Page
Loading...
Need help?
General
