Metrohm 930 Compact IC Flex - Figure 3 Removing the Transport Locking Screws

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
￭￭￭￭￭￭￭￭
13
Removing the transport locking screws
Figure 3 Removing the transport locking screws
1
Transport locking screws
For the vacuum pump. Only present if the
instrument has a degasser or a CO
2
Suppres-
sor (MCS).
2
Transport locking screws
For the high-pressure pump.
Store the transport locking screws in a safe place. Reinsert the transport
locking screws each time you transport the instrument a significant dis-
tance.
CAUTION
The pumps may be damaged if you transport the instrument without
inserting the transport locking screws.