Metrohm 930 Compact IC Flex Short Instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
￭￭￭￭￭￭￭￭
19
4.8 Installing the high-pressure pump
The high-pressure pump is completely connected. No installation work is
required.
4.9 Installing an inline filter
The inline filter is completely connected. No installation work is required.
4.10 Installing the pulsation absorber
The pulsation absorber is installed between the high-pressure pump and
the injection valve. It protects the separation column from damage caused
by pressure fluctuations, e.g. when the injection valve is switched, and
reduces interfering pulsations during highly sensitive measurements.
The pulsation absorber is completely connected. No installation work is
required.
4.11 Injection valve
The injection valve is completely connected. No installation work is
required.
4.12 Metrohm Suppressor Module (MSM)
The suppressor drive of the 930 Compact IC Flex can hold various rotors.
The large rotors, such as the MSM‑HC Rotor A (6.2842.000) and the
MSM-HC Rotor C (6.2842.200) can be inserted directly.
The small rotors, such as the MSM Rotor A (6.2832.000) and the MSM-LC
Rotor A (6.2844.000), must first be fitted into the adapter (6.2842.020),
which can then be inserted into the suppressor housing.
A connecting piece (6.2835.010) is used for all rotors for connecting the
Metrohm Suppressor Module (MSM) to the IC system.

Metrohm 930 Compact IC Flex Specifications

General

Brand	Metrohm
Model	930 Compact IC Flex
Category	Laboratory Equipment
Language	English