Micro control systems MCS-BMS-GATEWAY - Chapter - 2. NETWORK PROTOCOLS; Protocols MCS Controllers Support

MCS-MAGNUM-BMS REVISION 3.1
23
Network protocols are formatting rules that specify how data is sent and received between devices.
Protocols are necessary for devices to interact with each other.
2.1. Protocols MCS controllers support:
1. BACnet
2. MODBUS RTU
3. ETHERNET
4. MCS
5. LONTALK
6. JOHNSON N2
MCS Network Protocol Support
Magnum MicroMag
BACnet

MCS BACnet RouterR2
Modbus IP

In Development
MCS IP

MCS-Ethernet
Modbus RTU
 
MCS 485
 
BACnet MS/IP MCS-BMS-Gateway

Johnson N2 MCS-BMS-Gateway MCS-BMS-Gateway
LonTalk MCS-BMS-Gateway MCS-BMS-Gateway

=

Built in Support
Required MCS-BMS GATEWAY
Over
Ethernet
Over
RS485
Over
LonWorks
Chapter - 2. NETWORK PROTOCOLS