Micro control systems MCS-BMS-GATEWAY - BTL Mark - Bacnet Testing Laboratory; Introduction; Lonmark Certification; UL and Rohs Cerfication

MCS-BMS-GATEWAY Startup Guide REVISION 4.5
33
Chapter - 1. Introduction
MCS-BMS-GATEWAY-NL-NL is an external, high performance Building Automation multi-protocol gateway
that has been pre programmed to support BACnet®1 MS/TP, Metasys®2 N2 by JCI, LonWorks®3 and Mod-
bus IP to RTU. Congurations for the various protocols are stored within the MCS-BMS-GATEWAY-NL-NL
and are selectable via DIP switches for fast and easy installation. It is not necessary to download any congu-
ration les to support the required applications.
This document provides the necessary information to facilitate installation of the MCS-BMS-GATEWAY-NL-
NL.
1.1. BTL Mark – BACnet Testing Laboratory
The BTL Mark on the MCS-BMS-GATEWAY-NL-NL is a symbol that indicates to a consumer that
a product has passed a series of rigorous tests conducted by an independent laboratory which
veries that the product correctly implements the BACnet features claimed in the listing. The mark
is a symbol of a high-quality BACnet product. Go to http://www.bacnetinternational.net/btl/ for more
information about the BACnet Testing Laboratory.
1.2. UL and RoHS Cercation
The MCS-BMS GATEWAY is approved across a variety of standards, including the UL 916, CE,
and RoHS.
File No: 916 CE & RoHS
1
BACnet is a registered trademark of ASHRAE
2
Metasys is a registered trademark of Johnson Controls Inc.
3
LonMark is a registered trademark of LonMark International
4
LonWorks is a registered trademark of Echelon Corporation