Microhard Systems IPN4G - Page 154

© Microhard Systems Inc. 154
5.0 AT Command Line Interface
AT+MEMAC
Command Syntax
Retrieve the MAC Address of the local Ethernet
interface.
AT+MEMAC <enter>
Description
Example
Input:
AT+MEMAC<enter>
Response:
+MEMAC: "00:0F:92:00:40:9A"
OK
AT+MSIP
Command Syntax
Set LAN static IP
AT+MSIP=<static IP address> <enter>
Description
Example
Input:
AT+MSIP=192.168.168.1 <enter>
Response:
+MSIP: setting and restarting network...
OK
AT+MSCT
Command Syntax
Set LAN Connection Type.
AT+MSCT=<Mode>
Mode:
0 DHCP
1 Static IP
Description
Example
Input:
AT+MSCT=1 <enter>
Response:
OK