Microhard Systems IPN4G - Page 155

© Microhard Systems Inc. 155
5.0 AT Command Line Interface
AT+MNTP
Command Syntax
Enable and define a NTP server.
AT+MNTP=<status>,<NTP server>
Status:
0 Disable
1 Enable
Description
Example
Input:
AT+MNTP=1,pool.ntp.org<enter>
Response:
OK
AT+MPIPP
Command Syntax
Enable/Disable IP-Passthrough
AT+MPIPP=<Mode>
Mode:
0 Disable
1 Ethernet
Description
Example
Input:
AT+MPIPP=1 <enter>
Response:
OK
AT+MCNTO
Command Syntax
Sets the timeout value for the serial and telnet
consoles. Once expired, user will be return to login
prompt.
AT+MCNTO=<Timeout_s>
0 - Disabled
0 - 65535 (seconds)
Description
Example
Input:
AT+MCNTO=300 <enter>
Response:
OK