Microhard Systems IPN4G - Page 168

© Microhard Systems Inc. 168
5.0 AT Command Line Interface
AT+MCTMPS
Command Syntax
Set Comport data format
AT+MCTMPS=<size>
Description
Example
Input:
AT+MCTMPS=1024<enter>
Response:
OK
AT+MCTP
Command Syntax
Set Comport port priority.
AT+MCTP=<Mode>
Mode:
0 Normal
1 Medium
2 High
Description
Example
Input:
AT+MCTP=0<enter>
Response:
OK
AT+MCTNCDI
Command Syntax
Enable/Disable Comport port no-connection data
intake.
AT+MCTNCDI=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MCTNCDI=1<enter>
Response:
OK