© Microhard 116
Appendix D: Troubleshooting
Below is a number of the common support questions that are asked about the pMDDL5824. The purpose
of the section is to provide answers and/or direction on how to solve common problems with the
pMDDL5824.
__________________________________________________________________
Question: What is the default IP Address of the pMDDL5824?
Answer: The default IP address for the LAN is 192.168.168.1.
__________________________________________________________________
Question: What is the default login for the pMDDL5824?
Answer: The default username is admin, the default password is admin. You will be prompted to change
the password as soon as you login using the default.
________________________________________________________________
Question: How do I reset my modem to factory default settings?
Answer: If you are logged into the pMDDL5824 navigate to the System > Maintenance Tab. If you cannot
log in, power on the pMDDL5824 and wait until the modem complete the boot up process. Press
and hold the Config button for 8 seconds to reset to a factory default Master.
__________________________________________________________________
Question: I connected a device to the serial port of the pMDDL5824 and nothing happens?
Answer: In addition to the basic serial port settings, the IP Protocol Config has to be configured. Refer to
the COM0/1 Configuration pages for a description of the different options.
___________________________________________________________________
Additional topics will be added in future releases.
To Next Page
Loading...
