© Microhard 80
4.0 Configuration
Image 4-6-1: Diagnostics > Ping
4.6 Diag
4.6.1 Diag > Ping
The Network Tools Ping feature provides a tool to test network connectivity from within the pMDDL5824
unit. A user can use the Ping command by entering the IP address or host name of a destination device in
the Ping Host Name field, use Count for the number of ping messages to send, and the Packet Size to
modify the size of the packets sent.
4.6.2 Diag > Traceroute
The Traceroute command can be used to provide connectivity data by providing information about the
number of hops, routers and the path taken to reach a particular destination.
Image 4-6-2: Diagnostics > Trace Route
To Next Page
Loading...
