© Microhard 61
4.0 Configuration
This is the password, or preshared key that is required by any device
to connect to the wireless interface of the pMDDL5824. It is strongly
recommended to always have a password defined, and changed from
the factory default.
Encryption Key
Values (string)
1234567890
Check this box to show the currently configured password for the
encryption passphrase.
Show Password
Values (selection)
unchecked
When using Ethernet and Serial data. If the volume of serial data is
high, leave at the default (Normal Rate), if the volume of Ethernet data
is high set com data to High Rate (Compressed).
Comport Tx Rate
Values (selection)
Normal / High
The encryption types defines the type of security used for the Wireless
Interface, to join a network a device must know the correct Encryption
Key. Security options are dependent on the version type. Export
versions may not have all optional available to meet regulatory
requirements set government policies.
Encryption Type
Values (selection)
Disabled
AES-128
That parameter controls the stability of the mesh path.
When mesh nodes self-discover other nodes and form a mesh path, a
path table is established in each node. In real world applications, as
the environment changes, a "better" mesh path maybe generated
dynamically.
This change to the path tables comes at a cost, for example, to re-
establish a new path, the link may momentarily break. On one hand,
the nodes try to keep the original path to keep the link more stable. On
the other hand, the nodes need to refresh their tables to reflect new
and changing environments. Overall, this parameter controls how
sensitive the nodes refresh their mesh path tables.
The recommended setting is "Medium".
Degree of Mesh Path Agility
Values
High
Medium
Low
To Next Page
Loading...
