MICROMATIC Microtemp MTC4 - Adaptive Start Function (AdAP); Configuring Adaptive Start

PAGE 17
© 2021 OJ Electronics A/S
Adaptive start (AdAP)
This setting allows you to enable adaptive start function.
After af few days, the adaptive start will have
automatically calculated how much earlier the heating
must be turned on/o to achieve this.
See illustrations below when adaptive start is ON or OFF:
REMOTE
Access settings for adaptive start:
• Press ”
”for 3 seconds to enter the settings.
• Scroll through the settings until
AdAP appears on the
display.
• Press ”
”to enter the options.
• Use ”” or ”” set the open window function On or
O.
Menu structure:
AdAP:
On: Adaptive start is enabled.
O: Adaptive start is disabled.
17° 25° 17°
06:00
09:00
Adaptive
start On:
17° 25° 17°
06:00 09:00
Adaptive
start O: