PAGE 31
Troubleshooting and additional information
Error codes
E0 (
C-5E): Internalt Compensation Sensor error.
Heating is shut o.
E1 (
1-5E): Internal Sensor Error.
The sensor application is changed to C (regulator).
E2 (
E-5E): External Sensor Error.
(The sensor is either damaged, has shorted or
disconnected).
The sensor application is changed to C (regulator)
If rF is used - the sensor application is changed to r
(internal room sensor).
E5 (
1-OH): Internal OverHeat
Internal overheating. If the E5 error persists, please
contact your installer.
Note that the backlight is lit if any fault is detected.
Support
For support, please contact your installer or place of
purchase.
To Next Page
Loading...