PAGE 8
© 2021 OJ Electronics A/S
Override the heating schedule
REMOTE
Override heating schedule
Temporary override: During scheduled operation, you
can either use ”” or ”” to override the programmed
setpoint/temperature. This override will hold until next
scheduled event.
During temporary override, a clock ”
”and manual
mode ”
”symbol are shown on the dispay.
Permanet override: Press the ”
”one time to activate
manual override. The thermostat is now in manual
operation and the setpoint temperature can be adjusted
with ”” or ””.
Press ”
”again to exit manual mode and continue with
scheduled operation. During manual mode override, the
manual mode symbol ”
”is shown on the display.
REMOTE
To Next Page
Loading...