MICROMATIC Microtemp MTC4 - Temperature Readout Options; Accessing Temperature Read-out

PAGE 21
© 2021 OJ Electronics A/S
Temperature readout (-FtP, -rtP)
Depending on the type of sensor and sensor application
setting, the temperature from the floor sensor (
-FtP) and
the internal room sensor (
-rtP) can be monitored here.
Temperature readout are not applicable if the sensor
application is set to C.
REMOTE
Menu structure:
-FtP: Readout of the actual measured floor temperature
-rtP: Readout of the actual measured room
temperature.
Access temperature read-out:
• Press ”
”for 3 seconds to enter the settings.
• Scroll through the settings until either
-FtP (Floor
temperature) or
-rtP (Room temperature) appears on
the display.