Micromeritics GEMINI VII 2390 - Connect Optional Smart Vacprep to Analyzer

CONNECT OPTIONAL SMART VACPREP TO ANALYZER
No additional software is necessary for the SmartVacPrep. Smart VacPrep functions are built in
to the analyzer application.
The SmartVacPrep must be attached to an Ethernet switch. See Connect Ethernet Cable on
page2 - 3. The Smart VacPrep Operator Manual can be found on the Micromeritics web page
(www.Micromeritics.com).
Connect Optional Smart VacPrep to Analyzer
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
2 - 5