Table of Contents
Trademarks i
Warranty ii
Corporate Profile iii
Contact Us iv
About this Manual v
General Safety vi
1 Installation Overview 1 - 1
Prepare for Installation 1 - 1
Safe Servicing 1 - 2
Power 1 - 3
Parts And Accessories 1 - 3
2 Equipment Installation 2 - 1
Vacuum Pump 2 - 2
Connect Ethernet Cable 2 - 3
Connect the Power Cord 2 - 4
Apply Power to the Analyzer 2 - 4
Connect Optional Smart VacPrep to Analyzer 2 - 5
3 Keypad Only Installations 3 - 1
Operational Verification 3 - 4
Clean and Verify the Gas Line 3 - 4
Reference Analysis 3 - 5
Keypad and Keyboard Functions 3 - 7
RS-232 Operation 3 - 9
Communications 3 - 10
Data Results 3 - 14
ix
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
To Next Page
Loading...
