Micromeritics GEMINI VII 2390 - Data Results

3 Keypad Only Installations
DATA RESULTS
Communications on page3 - 10
Alt + 2
Press CHOICEto display the options. Press ENTERto select.
Data results for the last five analyses are saved in the analyzer’s memory. These results can be
viewed using a web browser. To use this feature, there must be a connection to a network via an
Ethernet cable and a keyboard attached to a USB port.
These steps assume an IP address has already been assigned. If an address has not
been assigned, follow the steps in Communications to assign one.
1. Open a web browser.
2. Enter the IP address in the Address field of the web browser. This must consist of numbers
only, separated by a decimal.
3. Press Enter on the keypad. The analyzer serial number displays in the window - for
example, 107.
4. Click the serial number hyperlink. A last five analyses display in the window.
3 - 14
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021