3 Keypad Only Installations
Function
Key Sequence Used To
Keypad Keyboard
Set Up
Alt +2 Ctrl +U Displays or edit analysis parameters, report
options, communication parameters, and sys-
tem options
Transmit
Alt +3 Ctrl +T Transmits analysis or calibration data over the
serial line. Transmits a partial report if an auto-
matic operation is in progress.
Alternate Functions (continued)
3 - 8
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
To Next Page
Loading...
