5. On the Select Language window, select the default language of the program, then click
Next. This window may not be available in all installations.
6. On the Choose Install Location window, verify that sufficient disk space is available to con-
tinue the installation. If not, click Cancel and free up the minimum required disk space. If the
disk space is OK, click Next to accept the default installation directory, or click Browse to
change the installation location, then click Next.
Software Installation in 21CFR11 Environments
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
8 - 7
To Next Page
Loading...
