8 21CFR11 Environments
13. If prompted for calibration files, insert the calibration media that shipped with the analyzer.
14. Click Browse to locate and select the [calibration] directory. Click Next. If not prompted for
calibration files, skip this step.
15. On the Analyzer S/N [n] Installed window, click Next. A window displays for each unit
installed.
16. The Product Release Information window contains information about updates and changes
included in the release. Click Next.
8 - 12
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
To Next Page
Loading...
