8 21CFR11 Environments
4. Click Add.
5. Verify that From this location points to the correct location. If not, click Locations to change.
This location may be either a network domain or the local computer name.
6. In the Enter the object names to select box, enter the name of the user to add to this group.
If necessary, change the Locations field to where the user name is stored. Click OK. The
user name is added to the list of users for the selected group. Continue this process until all
applicable users have been added to the group.
7. Click Apply, then click OK.
8. Repeat this process until all applicable users have been added to each group.
8 - 20
Gemini VII 2390 Installation Instructions and Checklist
239-42870-02 Rev (B) — May 2021
To Next Page
Loading...
