Microtest 6630 - Page 71

66
<Command> :CORRection:HF
:CORRection:HF?
Function：
It performs the high frequency load correction.
Description：
CORRection:HF To perform high frequency load correction with no result feedback.
CORRection:HF? To perform high frequency load correction with result feedback.
Set syntax: CORRection:HF
Query syntax: CORRection:HF?
Return
data
0|1
where 0= The result of high frequenct load correction is failed
1= The result of high frequenct load correction is passed
<Command> :CORRection:HF:STATe {ON|OFF|0|1}
:CORRection:HF:STATe?
Function：
It sets or queries the state of high frequency load correction.
Description：
Set parameter {ON|OFF|0|1}
Set syntax: CORRection:HF:STATe ON
Query syntax: CORRection:HF:STATe?
Return
data
0|1
where 0= High frequency load correction function is disabled.
1= High frequenct load correction function is enabled.
<Command> :CORRection:LOAD
:CORRection:LOAD?
Function：
It performs the spot load correction.
Description：
CORRection:LOAD To perform spot load correction with no result feedback.
CORRection:LOAD? To perform spot load correction with result feedback.
Set syntax: CORRection:LOAD
Query syntax: CORRection:LOAD?
Return
data
1
where 1= The result of spot load correction is passed
<Command> :CORRection:LOAD:STATe {ON|OFF|0|1}
:CORRection:LOAD:STATe?
Function：
It sets or queries the state of spot load correction.
Description：
Set parameter {ON|OFF|0|1}
Set syntax: CORRection:LOAD:STATe ON
Query syntax: CORRection:LOAD:STATe?
Return
data
0|1
where 0= Spot load correction function is disabled.
1= Spod load correction function is enabled.
<Command> :CORRection:FIXTure {OFF|F42001|FX-000C19||FX-000C20|FX-000C10|
FX-000C12||FX-000C7|FX-000C8|FX-000C6}
:CORRection:FIXTure?
Function：
It sets or queries the state of spot load correction.
Description：
Set syntax: CORRection:FIXTure OFF
Query syntax: CORRection:FIXTure?
Return
data
OFF