22
(5) A20 in the figure represents the 20th pin of slot A.
3.1.5 Meter Mode
This function allows selecting of Conductance, R/L/C/D, Insulation, Withstanding, and use the meter
mode to perform continuous tests.
(1) Press [Func].
(2) Please use [↑] or [↓] to select meter mode and then press [Enter].
(3) Select the test item (Conductance, R/L/C/D, Insulation, Withstanding) and press [Enter].
The LCD screen will display as follows:
To Next Page
Loading...
