63
(6) Press [Mode] to display the test mode setting screen.
(7) Check and confirm whether the test mode settings are correct, and change according to your
needs.
(8) After confirming there are no errors, press [EXIT] to exit and return to the main screen.
(9) Press [TEST] to start testing.
(10) When the test is complete or if the test needs to be interrupted, please press [EXIT] to exit.
4.3 File Management
You can execute select old file/delete old file/file sorting actions to make it easier to manage and use
the files; instructions are as follows:
4.3.1 Select File
Select file loads files saved on the permanent memory to the main memory so that they can be used for
other purposes, including testing, editing, and printing etc. Instructions are as follows:
(1) Press [File].
(2) The LCD screen will display as follows:
(3) Please use [↑] or [↓] to move the cursor to select the file name to load.
(4) Press [Enter] to execute the load file action.
(5) The tester will start loading the selected file into the main memory.
To Next Page
Loading...
Need help?
General
