33
(19) Seq. Result Mode
Alone: Display and output test result for each step. Combined: Unified display of test results.
(20) PC Link Cmd
The connection program used (Microtest official) must be “On”.
(21) Test Counter
A prompt will appear when the number of tests has been reached when enabled; which means that it
has reached the number of times set.
0: Off 1~999999: On. Default is 0.
(22) Cond. Offset Range
Sets the cable offset range edited for the conductance; 1~45. Default is 10.
(23) R Offs. Delay
R offset delay time setting. 3000us~60000us. Default is 3000us.
(24) AF Delay Time
Frame current output delay time setting. 1ms~1000ms. Default is 5ms.
(25) Default Setting
All options of the test environment setting are reset to the factory default values.
(26) OS Check Times
OS error check times. 1-1000. Default is 3.
(27) TC OS Read
Applicable to Type C models; read delay time setting. Default is 70.
(28) Cond AVG Times
Set the average conduction test times. Default is 4.
(29) Seq. Stat.
Sequential statistics mode: General, multiple DUTs. Default is general.
3.2.3 Set System Time
This function can adjust the system’s year/month/day/hour/minute/second.
(1) Press [Sys].
(2) Use [↑] or [↓] to select this function.
To Next Page
Loading...
