C-4
ARC-6000
98-05012
R3
to be sent to the control console.
Implement Status Switch - Provides a another means
to stop the spraying operation. This switch may
take the form of a foot swich or an implement switch
mounted on the toolbar that opens a circuit as the
tool bar is raised, effectively stopping the spraying
operation..
Liquid Flow Control Valve – The term used to describe
a control valve that is capable of receiving and
acting upon increase and decrease information from
the Control Console and in turn controls the flow of
liquid product.
Master switch - A control switch that allows the
operator to turn on and off all active boom swith
one switch.
Product – Refers to the material that is to be metered
and therefore controlled by the Control Console.
This material can be grouped into the following
categories:
Liquid – Includes, but is not limited to, liquid fertilizer,
liquid fertilizer with chemical, water, water with
chemical, liquid lime, deicing solutions, salt
solutions, liquid manure, etc.
Chemical – Includes, but is not limited to, herbicide,
liquid fertilizer, spray adjuvants, fungicides,
insecticide, etc.
NH
3
– (Anhydrous Ammonia) A fertilizer material that
is condensed from a gas to a liquid in order to be
metered. Density of this material is entered into the
equation in order for pounds of Nitrogen to be
targeted and recorded.
Peristaltic Injection Pump - A pump in which a piece
of tubing (see Pump Tube) inserted into the pump is
squeezed between the inside wall of the pump and
rollers attached to a rotating plate. Since the rollers
are evenly spaced in the plate, the amount of
material trapped between to the rollers is always
consistant. By knowing how many revolutions the
pump rotor has made, we can calculate quite
To Next Page
Loading...