C-5
98-05012
R3
ARC-6000
precisely the volume of liquid discharged by the
pump.
Pump Control Module- An electronic module, located
inside the injection pump enclosure, which controls
the various pump functions as required by the main
system control console.
Pump Tube - A length of tubing, usually Python or ED-
Plex, used in a peristaltic type injection pump.
Returned Material Autherization Number (RMA) - A
number obtained from MID-TECH or your dealer,
which serves as your approval to return the item
and informs MID-TECH of the circumstances of the
return so that proper action (repair, replacement,
credit, etc.) can be initiated quickly upon receit of
the item at MID-TECH.
Swath – A boom section or group of boom sections
that should accumulate area and volume as a group.
This term refers to a condition that is stored in the
boom control module and utilized by the Control
Console.
Sparge - The process of routing excess product pump
output back to the product tank for agitation to
keep dissolved products in suspension.
Valve Driver Module - An electrinic circuit, usually
enclosed in a “ potted boot” attached to a cable.
This unit acts as an interface between the console
control signals and the actual drive signals to the
valve.
To Next Page
Loading...