Midtronics EXP-800 - Edit Coupon Message; Temperature Unit Settings; Track Calls Logging

18
Chapter 4: Admin/Utility Menu EXP-800
Edit Coupon
The EDIT COUPON utility allows you to create and
store a promotional coupon or message on the
printed test results you give tor your customers.
The utility’s two information screens contain eight
lines of text with a maximum of 17 characters per
line. To enable and disable the inclusion of the text
on your test results, use the COUPON utility.
To create and edit a coupon, see the procedure under “Shop”
in this chapter for using the keypad to enter and backspace
over characters.
To help you edit and center your coupon, use a pencil to write the information in the template below before entering it into the
analyzer.
Coupon Template
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
Line 8
Temp
The TEMP. UNITS utility allows you to set the units
of measurement to either Fahrenheit or Celsius. To
set your preference:
1. Use the UP or DOWN ARROW key to move the dot to
the option button of your choice (1 or 2).
1 DEGREES F
2 DEGREES C
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the Admin/Utility Menu without sav-
ing the changes.
Track Calls
The TRACK CALLS utility stores the test results and
test codes by date as an .xml (Extensible Markup
Language) le in a folder named ”XML” on the data
card before the EXP prints the results. This utility
requires a data card reader (not included) to read
or transfer the le to a PC. You can open the le
in Microsoft
®
Internet Explorer
®
. The data in the le
is separated by tags (identiers enclosed in angle
brackets) that dene the data.
NOTE: To avoid corrupting the le, copy rather
than move the le to your PC.
The default setting for the utility is OFF. To set your prefer-
ence:
1. Use the UP or DOWN ARROW key to move the dot to the
option button of your choice (1 or 2).
1 TRACKING OFF
2 TRACKING ON
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the Utility Menu without saving the
changes.
NOTE: Over time disk access slows as the format
card reaches its capacity. To free up card space,
transfer the les to a PC and reformat the card to
permanently erase data no longer needed.