Midtronics EXP-800 User Manual

19
Chapter 4: Admin/Utility MenuEXP-800
Language
The LANGUAGE utility allows you to select a lan-
guage for the display and printouts. You can over-
ride the selection when the EXP displays the lan-
guage option after you turn it on or print results.
To set your preference:
1. Use the UP or DOWN ARROW key to move the dot to the op-
tion button of your choice (1, 2, or 3).
1 ENGLISH
2 ESPAÑOL
3 FRANÇAIS
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the Admin/Utility Menu without sav-
ing the changes.
Admin
This section explains how to use the Admin Utility
to control User ID access to the EXP. It also describes
functions that clear test totals and restore settings
to factory defaults.
Select the ADMIN icon to display a list of administrative
functions:
1 OPTIONS
2 CLEAR TEST TOTALS
3 RESET DEFAULTS
Options
In the OPTIONS section there are three functions that allow
you to control user access to the Main Menu and Admin/Utility
Menu. Each option is easily enabled or disabled by turning it
ON or OFF. To save your settings after each selection, press the
SAVE soft key. To return to the administrative functions list
without saving, press the BACK soft key.
1 – USER ID
Select this setting to enable (ON) or disable (OFF) the
USER ID login screen.
2 – UNREG. USER
Select this setting to enable (ON) or disable (OFF)
unregistered login access to the analyzer when option
1 – USER ID is ON.
3 – PRINT HEADER
Select this setting to enable (ON) or disable (OFF) the
address header on the printout.
4 – LANGUAGE
Select this setting to enable (ON) or disable (OFF) the
language selection option when the EXP boots up.
5 – DATE CODE
Select this setting to enable (ON) to require the entry of a
battery date code
6, 7. 8 – SCREEN INPUT
Select this setting to enable (ON) to display user-dened
text elds
Clear Test Totals
This function allows you to clear the test totals by User ID and
battery test decision. The analyzer veries that you want the
counter reset to 0 before it continues.
NOTE: This will not clear the lifetime test total
available in the VERSION information screen.
Reset Defaults
This function allows you to reset Administrative options to
their original settings. It will clear all registered users and
restrict access to the EXP.
Option Default Settings
1 – USER ID ON
2 – UNREG. USER ON
3 – PRINT HEADER OFF
4 – LANGUAGE ON
5 – DATE CODE OFF
6, 7, 8 – SCREEN INPUTS OFF
Store ID#
The next screen asks you to enter your store ID
number.
1. Insert a character by pressing the UP or DOWN ARROW
key as many times as needed.
ENTER STORE ID#
2. Press the NEXT soft key to continue.
3. Use the UP or DOWN ARROW key to enter your store’s zip
code, and press the SAVE soft key.
ENTER ZIP CODE

Midtronics EXP-800 Specifications

General

Brand	Midtronics
Model	EXP-800
Category	Measuring Instruments
Language	English