Miele PW 413 - Page 40

Programme chart - MOPSTAR
40
Mops chemo-thermal dis-
infection*****
60°C Fill ratio/Load
size
Material Cotton, viscose, polyester and microfibre mops
1:10
PW 413 - 13kg
PW 418- 18kg
For number,
see
"Mops per load"
chart
Programme se-
quence
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Disinfection*** 60°C, 20min.
3 rinses
Final spin
New mops* 60°C / 90°C
Material For washing new mops
Programme se-
quence
Main wash 60°C (selectable range cold to
90°C), Cool down can be activated
2 rinses
Final spin
Mops standard + finish* 60°C / 90°C
Material Cotton, viscose, polyester and microfibre mops
Programme se-
quence
Programme sequence as for Mops standard,
then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Mops thermal disinfec-
tion + finish* **
90°C
Material Cotton, viscose, polyester and microfibre mops
Programme se-
quence
Programme sequence as for Mops thermal disin-
fection, then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
* The Cooldown block can be activated if required, e.g. for gently cooling down microfibre mops.
** Programme locked. If a programme is locked, after 1minute it can no longer be stopped and cancelled with the finish
button.