EasyManua.ls Logo

Miele PW 413 - Installation and Technical Data; Installation and Connection Guide

Miele PW 413
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and connection
77
Installing the washing machine
The washing machine must be installed by Miele Service or by an
authorised dealer. Please observe the information on the installa-
tion diagram.
This washing machine is only intended for items of laundry which
have not been impregnated with dangerous or inflammable sub-
stances.
To avoid the risk of frost damage, the machine must not be located
in rooms which may be subject to very low temperatures.
Transport the machine on a trolley inside the room.
Machines with feet must not be pushed to move them.
This could damage them.
Remove the packaging carefully with a suitable tool.
Lift the machine off the pallet using a lifting device.
General operating conditions
This washing machine is intended only for use in a commercial envir-
onment and must only be operated indoors.
Ambient temperature in installation room: 0°C to 40°C
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a pro-
fessional in instances where increased noise may cause a nuisance.

Table of Contents

Related product manuals