Miele PW 413 - Programme Selection and Execution

Washing
27
Detergent dispensing
Avoid dispensing more than the required amount as this can cause
excessive foaming.
– Only use low foaming detergents.
– Dispense according to the detergent manufacturer's recommenda-
tions.
The amount to dispense will depend on:
– the amount of laundry
– the water hardness level in your area
– the type and amount of soiling level in the laundry
Amount of deter-
gent
Please dispense according to water hardness levels and follow the
detergent manufacturer's instructions.
Water hardness
levels
Hardness range Hardness in mmol/l German scale °dH
I (soft) 0 - 1.5 0 - 8.4
II (medium) 1.5 - 2.5 8.4 - 14
III (hard) above 2.5 above 14
Check with your local water supplier if you do not know the water
hardness in your area.
Selecting a pro-
gramme
The first 6 programmes can be selected directly using buttons 1-6.
6 Delicates 13,0/13,0 kg
50 Main wash
Rinses
1 2 3 4 5 6

rpm1025

°C
 Other programmes can be selected by pressing and holding but-
ton6 .
Tip: The same applies in other displays for buttons12 and 18.
8 Separate rinse 13,0/13,0 kg
Rinses
7 8 9
10
11 12



rpm1025
 Select a programme by pressing one of the programme buttons.
The following (e.g.) will appear in the display:
6 Mops first wash 13,0/13,0 kg
50 Main wash
Rinses
1 2 3 4 5 6


rpm1025
°C