Programme chart - MOPSTAR
47
Separate drain
Material
Programme se-
quence
Water drainage
'Clean machine' programme
For cleaning the detergent dispenser drawer, the drum, the suds container and the
drainage system.
Carry out the "Clean machine" programme regularly if you frequently use disinfection
programmes or low temperature programmes, or to get rid of coarse soiling.
Clean machine*
Material Without load
Programme se-
quence
+ Cleaning 70°C, optional
2 rinses
* The Cleaning block which takes water in through all inlets and has the temperature increased to 70°C. can be selected
with this programme by pressing the Block Plus button. If the Cleaning block is included in the Maintenance programme,
detergent needs to be dispensed.
To Next Page
Loading...
