Miele PW 413 - Page 44

Programme chart - MOPSTAR
44
Cloths standard+finish 60°C Fill ratio/Load
size
Material Cotton, viscose, polyester and microfibre clean-
ing cloths
1:20
PW 413
16g/cloth
approx. 415 cloths =
6.6kg
22g/cloth
approx. 300 cloths =
6.6kg
PW 418
16g/cloth
approx. 565 cloths =
9kg
22g/cloth
approx. 409 cloths =
9kg
Programme se-
quence
Programme sequence as for Cloths standard,
then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Cloths thermal disinfec-
tion+finish* **
90°C
Material Cotton, viscose, polyester and microfibre clean-
ing cloths
Programme se-
quence
Programme sequence as for Cloths thermal dis-
infection, then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Cloths chemo-thermal
disinfection + finish***
**
70°C
Material Cotton, viscose, polyester and microfibre clean-
ing cloths
Programme se-
quence
Programme sequence as for Cloths chemo-
thermal disinfection.
Disinfection, then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet.
Finish cloths
Material Cotton, viscose, polyester and microfibre clean-
ing cloths
Programme se-
quence
1 rinse
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
* The Cooldown block can be activated if required.
** Programme locked. If a programme is locked, after 1minute it can no longer be stopped and cancelled with the finish
button.
*** The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time, and dosages)
must be set on site to suit cleaning agents and disinfectants.